10 Replies Latest reply on Dec 5, 2019 9:40 AM by CoreyW_81

    g++: Command not found

    CoreyW_81

      I have followed the information in Chapter 3 of the attached Guide to attempt debugging of the "blinky" application.  However, when I get to the step where I try to program the board from the launch called: "CY8CKIT_062_WIFI_BT_mbed-os-example-blinky_program" I get the following error:

       

      11:01:30 **** Incremental Build of configuration Default for project mbed-os-example-blinky ****

      make all

      g++     .././mbed-os/platform/cxxsupport/mstd_mutex.cpp   -o .././mbed-os/platform/cxxsupport/mstd_mutex

      make[1]: g++: Command not found

      make[1]: *** [<builtin>: .././mbed-os/platform/cxxsupport/mstd_mutex] Error 127

      make: *** [Makefile:26: all] Error 2

      "make all" terminated with exit code 2. Build might be incomplete.

       

      11:01:36 Build Failed. 3 errors, 0 warnings. (took 5s.282ms)

       

      I've checked, and my build properties seem to be correct per the guide:

       

      Any help would be appreciated.