1 Reply Latest reply on Nov 22, 2019 9:00 AM by SiRo_4590426 Branched from an earlier discussion.

    Re: CY8CPROTO-063-BLE


      Hello Silvia,


      Please ensure the following:


      1) In the Tera term ensure that you have made correct settings for Serial port.

      Baud Rate: 115200 (This is the default baud rate for UART in PSoC 6 Hello World code example)

      select the correct COM port.

      Data: 8bit

      Parity: none

      Stop Bits: 1


      2) If you are using the latest version of Kitprog 3 (1.13) ensure that the device is in HID mode.


      Please let me know if this works for you.


      Best Regards