- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello
Page 47 of FX3 data sheet (Document Number: 001-52136 Rev. * X) is described No.1~No.11 as Errata Summary.
Please tell me whether all the errata (except No6, 10) are supported for the following source code of AN75779.
https://www.cypress.com/file/123501/download
Best Regards,
Arai
メッセージ編集者: Norimitsu Arai 11/28 I will attache the excel sheet.
Solved! Go to Solution.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello Arai san,
I have addressed the above questions and am adding the answers to the queries in the attached excel sheet.
Hope this helps.
Regards,
Yashwant
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello Arai-san,
All the necessary workarounds of the FX3 datasheet errata are implemented in the AN75779.
But, if you are going to do some ESD tests, you should go through the work-around provided in the datasheet on page 50, which talks about No. 8 and refer to GpiftoUsb example to see the work-around provided.
Also, refer to page 52, errata no. 11, which is a suggested workaround that needs to be implemented in the firmware to handle the interrupt.
Regards,
Yashwant
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello
>you should go through the work-around provided in the datasheet on page 50, which talks about No. 8 and refer to GpiftoUsb example to see >the work-around provided.
>
Regarding workaround mentioned above, CYU3P_USBEPSS_RESET_EVT is described in the GpiftoUsb code. However, they can not find CYU3P_USBEPSS_RESET_EVT of AN75779 by Grep search, is it ok to think that it is included as an object?
Best Regards,
Arai
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello Arai-san,
The work-around for the above issue is included in the GpiftoUsb example only.
The customer will have to include the same workaround in their AN75779 example if they are going to perform some in-house ESD tests.
But this workaround is not included in the project as an object and the customer will have manually add that part.
Please ask the customer to understand the workaround and then implement the same in their frimware if necessary.
Regards,
Yashwant
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello Yashwant san
I will attache the Excel sheet for errata, please comment in column F. We want to check whether it is necessary to add the firmware code manually in other parts(No.3, No.4, No.5, No.7,No.9) .
Best Regards
Arai
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello Yashwant san
Any updates? Should I provide an additional explanation for my question?
Best Regards
Arai
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello Arai-san,
Can you please provide an additional explaination as to what your question is?
Regards,
Yashwant
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello Yashwant san
Please check the attached Excel sheet(Errata_check.xlsx) the other day.Please clarify if the customer need additional FW code manually.In particular, confirmation No.3, No.4, No.5, No.7 and No.9 are necessary.Also, the customer performed a grep search the AN75779 code and confirmed that some workaround were taken(Please check column E), and please comment in column F.
Best Regards
Arai
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I'm sorry. I will add the Excel column symbol.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello Yashwant san
Thank you for your reply.
Best Regards,
Arai