Error in hello world code example in ModusToolbox with CY8CPROTO-063-BLE

[dabo_4430311]

Hi everyone, while programming the kit CY8CPROTO-063-BLE with Hello world sketch by SWD communication I getter's the following error:

"""""

[100%] [################################] [ Programming ]

wrote 44032 bytes from file /Users/salvatorecastelbuono/mtw/Hello_World/build/CY8CPROTO-063-BLE/Debug/mtb-example-psoc6-hello-world.hex in 5.014288s (8.575 KiB/s)

** Programming Finished **

** Program operation completed successfully **

srst_only separate srst_gates_jtag srst_open_drain connect_deassert_srst

Info : SWD DPIDR 0x6ba02477

shutdown command invoked

"""""

and also I cannot visualize the Hello world message into the serial terminal Tera Term running at 115200 baud and 8n1, i'm just visualizing random characters.

What is the problem and how should I fix it?

[ShipingW_81]

It looks there is no issue from the log info you attached. Can you tell what's the error?

I tried out this code example on CY8CPROTO-063-BLE using MTB2.0​. There is also no any problem. The log printing is normal, as below capture show -