1 Reply Latest reply on Nov 24, 2019 11:24 PM by GauravS_31

    Murata 1LD and J-link

    DaRa_4056336

      Hi,

      I'm using Murata 1LD custom board with external flash connected using spi.

       

      I changed the driver to LibusbK using zadig and added reset_config trst_and_srst srst_push_pull to jlink.cfg file unde openocd.

       

      I am trying to program using make snip.ccc-MurataType1LD JTAG=jlink download download_apps run it don't work

       

      Log:

      Downloading Bootloader ...

      Building apps lookup table

      Download complete

       

       

      Downloading DCT ...

      No changes detected

       

       

      Downloading resources filesystem ... build/snip.chronisense-MurataType1LD/filesystem.bin at sector 1  size 104...

      Downloading apps lookup table in wiced_apps.mk ... build/snip.chronisense-MurataType1LD/APPS.bin @ 0x0000 size

      tools/makefiles/wiced_apps.mk:423: recipe for target 'APPS_LUT_DOWNLOAD' failed

      make.exe[1]: *** [APPS_LUT_DOWNLOAD] Error 1

      Makefile:351: recipe for target 'main_app' failed

      make: *** [main_app] Error 2

       

      openocd_log.txt

       

      Open On-Chip Debugger 0.10.0+dev-00227-g0d15c62 (2018-03-27-15:19)

      Licensed under GNU GPL v2

      For bug reports, read

      http://openocd.org/doc/doxygen/bugs.html

      trst_and_srst separate srst_gates_jtag trst_push_pull srst_push_pull connect_deassert_srst

      adapter speed: 1000 kHz

      adapter_nsrst_delay: 100

      Info : auto-selecting first available session transport "jtag". To override use 'transport select <transport>'.

      jtag_ntrst_delay: 100

      Warn : target name is deprecated use: 'cortex_m'

      jtag_init

      post_init_psoc6_setup

      Info : J-Link V10 compiled Oct  8 2019 14:57:57

      Info : Hardware version: 10.10

      Info : VTarget = 3.270 V

      Info : clock speed 1000 kHz

      Info : JTAG tap: stm32f4xx.cpu tap/device found: 0x4ba00477 (mfg: 0x23b (ARM Ltd.), part: 0xba00, ver: 0x4)

      Info : JTAG tap: stm32f4xx.bs tap/device found: 0x06441041 (mfg: 0x020 (STMicroelectronics), part: 0x6441, ver: 0x0)

      Warn : JTAG tap: stm32f4xx.bs       UNEXPECTED: 0x06441041 (mfg: 0x020 (STMicroelectronics), part: 0x6441, ver: 0x0)

      Error: JTAG tap: stm32f4xx.bs  expected 1 of 1: 0x06413041 (mfg: 0x020 (STMicroelectronics), part: 0x6413, ver: 0x0)

      Error: Trying to use configured scan chain anyway...

      Warn : Bypassing JTAG setup events due to errors

      Info : stm32f4xx.cpu: hardware has 6 breakpoints, 4 watchpoints

      Info : JTAG tap: stm32f4xx.cpu tap/device found: 0x4ba00477 (mfg: 0x23b (ARM Ltd.), part: 0xba00, ver: 0x4)

      Info : JTAG tap: stm32f4xx.bs tap/device found: 0x06441041 (mfg: 0x020 (STMicroelectronics), part: 0x6441, ver: 0x0)

      Warn : JTAG tap: stm32f4xx.bs       UNEXPECTED: 0x06441041 (mfg: 0x020 (STMicroelectronics), part: 0x6441, ver: 0x0)

      Error: JTAG tap: stm32f4xx.bs  expected 1 of 1: 0x06413041 (mfg: 0x020 (STMicroelectronics), part: 0x6413, ver: 0x0)

      Error: Trying to use configured scan chain anyway...

      Warn : Bypassing JTAG setup events due to errors

      Error: timed out while waiting for target halted

      TARGET: stm32f4xx.cpu - Not halted

      in procedure 'sflash_write_file'

      in procedure 'sflash_init' called at file "apps/waf/sflash_write/sflash_write.tcl", line 261

      in procedure 'init' called at file "apps/waf/sflash_write/sflash_write.tcl", line 155

      in procedure 'ocd_bouncer'

      in procedure 'transport'

      in procedure 'ocd_bouncer'

      in procedure 'jtag_init' called at file "../WICED-OpenOCD/src/jtag/core.c", line 1578

      in procedure 'reset' called at file "./tools/OpenOCD/stm32f4x.cfg", line 125

      in procedure 'ocd_bouncer'

       

       

      in procedure 'sflash_write_file'

      in procedure 'sflash_init' called at file "apps/waf/sflash_write/sflash_write.tcl", line 261

      in procedure 'init' called at file "apps/waf/sflash_write/sflash_write.tcl", line 155

      in procedure 'ocd_bouncer'

       

      What can be the problem ? any ideas?

       

      Thanks!!

      David