- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
I would like to confirm regarding AC Characteristics of the S29AL008J70TFI010.
As per datasheet, tACC max is 70ns. But from Logic Analyzer capture, I am getting 1.3us.
Can please help to clarify if I am measuring at the correct point?
DATASHEET AC CHARACTERISTIC:
LOGIC ANALYZER CAPTURE:
Solved! Go to Solution.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello,
Thank you for contacting Cypress Semiconductor.
Please verify the tCE timing parameter, as it should be ~70nS (max.)
As well, please use an Oscilloscope, as it may be more accurate rather than a Logic Analyzer
to measure tCE and tACC, and respond with your timing results.
Thank you in advance...
Best regards,
Albert
Cypress Semiconductor
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello,
Thank you for contacting Cypress Semiconductor.
Please verify the tCE timing parameter, as it should be ~70nS (max.)
As well, please use an Oscilloscope, as it may be more accurate rather than a Logic Analyzer
to measure tCE and tACC, and respond with your timing results.
Thank you in advance...
Best regards,
Albert
Cypress Semiconductor