1 of 1 people found this helpful
Do you include the ota_server as your component in application mk file ?
Check the snip/ota_fr as reference!
I did include the ota_server as a component in application make file. I took the snip_ota_fr as a reference and build the application. That's why I am bit puzzled how the linking of the server is not happening.
Thank you for your response.
Did you see Compiling Lib_OTA_Server in you build log!
or make clean first, then rebuild it again!
Yes, in the build log I have already noticed Compiling Lib_OTA_Server.
Compiling phase is finished successfully, but it is failing in link phase.
And I also tried make clean and build but no success....
How about the application snip.ota_fr could build ?
attached your config.mk under build/your_apps/config.mk !
2015-07-16 15:08 GMT+08:00 lavanya@gndsolutions <
intergating the OTA Upgrade with Application for Wiced PLUS EVB
reply from lavanya@gndsolutions
in WICED Wi-Fi Forums - View the full discussion
Try to clean up every thing first (or delete the build folder) and rebuild and see if this solves your problem.
Thank you for your support.
I got it running. The issue was I skipped adding the download_apps in the build target. After that I did make clean and built the target.