The hex file compiled by the server arm-none-eabi-gcc cannot be burned to the psoc6 chip

[yach_4179311]

Hello everyone:

I have a problem. I have a project migration program, which uses the program compiled by arm-none-eabi-gcc on the server to generate hex files. I have migrated the LD file of psoc6, but after compiling it, I burn it to the programmer application prompt on the chip, hex file parsing failure. Unknown record type. I want to know the hex file compiled by general arm-none-eabi-gcc and the PSoC creator What are the differences between the generated files and how to modify them to meet the burn-in conditions?

Attached is my compiled hex file

[DheerajK_81 · Accepted solution]

Please refer to the following thread: Understanding data in cypress hex file

Regards,
Dheeraj