Cypress have a TYPE_C and USB3.0 gigabit earthnet?

Announcements

Live Webinar: USB-C adoption. Simple & Cost-efficient solutions | April 18th @9am or 5pm CEST. Register now !

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
huhu_4151711
Level 1
Level 1

We have a 5 megapixel UVC camera plus a TYPE_C camera that we want to combine with the gigabit output display, gigabit compatible with POE, do you have such a development plan? if  POE is not, allow too, please recommend !

Best Regards!

0 Likes
1 Solution

Hi ,

Currently, The Giga-net chip Cypress do not have. For Type-C and Type-A, you can use:

Type-C port: CYPD3171 if the Project is going to use USB3.0 data pass.

                     CYPD4126/CYPD5125/CYPD6125 if the projector is going to use DisplayPort stream.

Type-A port: you can use CYUSB3302 HUB and use DS1 on Type-C and DS2 on Type-A. US port on Giga-net.

Best Regards,

Lisa

View solution in original post

0 Likes
3 Replies
ShifangZ_26
Moderator
Moderator
Moderator
10 likes given 250 sign-ins 1000 replies posted

Hi ,

We could offer you a chip sets if you have block diagram of your requirements.

Best Regards,

Lisa

0 Likes

Hi ,

Currently, The Giga-net chip Cypress do not have. For Type-C and Type-A, you can use:

Type-C port: CYPD3171 if the Project is going to use USB3.0 data pass.

                     CYPD4126/CYPD5125/CYPD6125 if the projector is going to use DisplayPort stream.

Type-A port: you can use CYUSB3302 HUB and use DS1 on Type-C and DS2 on Type-A. US port on Giga-net.

Best Regards,

Lisa

0 Likes