2 Replies Latest reply on Oct 30, 2019 11:23 PM by BoonT_56

    WICED HCI Download firmware to ram using client control

    siaa_4420406

      Hello,

       

      I currently try to download a hcd firmware to ram using Client Control following Doc. No.: 002-16618 https://www.cypress.com/file/462731/download

       

      My eval board is a CYBT-213043-EVAL

      I have try using as base firmware a custom one which implement WICED HCI Uart and BLE_HelloClient without modification .

      I can confirm that the "download to ram" feature should work on my firmware since the following command result are ok :

       

      HCI RESET CMD/REPLY

      UPDATE_BAUDRATE CMD/REPLY

      DOWNLOAD_MINIDRIVER CMD/REPLY

       

      Using ClientControl software to flash my own HCD file i got the following error :

      10-30-2019 17:58:24.756: Wrong HCD file format trying to read the command information

       

       

      I have try to set DIRECT_LOAD=1 as noticed in the older version of Doc. No.: 002-16618 https://www.cypress.com/file/352891/download  without success.

       

      Did I miss something ?

       

      Thanks

      Simon