From what I recall, the Anaren EVK was never a supported platform within the WICED Smart SDK.
Our 20737 EVK is definitely supported.
My understanding is that Digikey purchased Atmosphere, and now calls it the "IoT Studio"
You may want to check with DK to determine if the Anaren Kit is still supported within IoT Studio. I'm guessing that it is...
Interesting, thank you for that insight. It was the Atmosphere folks who told me to look at Wiced, since Atmosphere pulled support of 20737 based products. I'm wondering if they were thinking it was a Cypress EVK, and not Anaren.
I just looked at the Digikey IoT Platform, it is simply Atmosphere with a Digi-key banner.
My sense is, I have a nice evaluation board with no tool/software support, or at least, that I'm at the skill level of sorting out.
Yes, at one point, I believe they provided Platform files that worked within the WICED Smart SDK.
Have you installed the WICED Smart EVK and plugged the Anaren board in? Anaren followed out EVK design for the most part, so it may work out of the box.
Yea, I gave that a try. Selected the various drop down options for devices, no luck. There is no option for a 20737 series device, and the SDK reports that it cannot find the target board.
As far as Wiced goes, I installed the Wiced Studio, as opposed to Wiced Smart. I couldn't find anything that details the differences between the two, went on the premise that the Studio package includes everything the Smart tool offers, but I very well could be wrong there.
If you are looking for a BLE product that's easy to use and well supported with tools, take a look at PSoC 4 BLE: https://www.cypress.com/products/psoc-4-ble-bluetooth-smart
Use PSoC Creator for Development: https://www.cypress.com/products/psoc-creator-integrated-design-environment-ide
If you want a high level serial interface that's even easier to use, take a look at EZ-Serial: https://www.cypress.com/documentation/software-and-drivers/ez-serial-ez-ble-module-firmware-platform
Here's the kits you'd need:
Success!! Looks like we have Wiced Smart for the win. I needed to click a few screens further in, and that led me to the 20737 being listed as a supported device in Wiced Smart (but not, Wiced Studio). I was able to load one of the example files onto the device, so looks like this at least gives me some access to the EVK.
Excellent. I thought that the Anaren kit worked out of the box, but wasn't sure if they provided a custom platform or not.