1 Reply Latest reply on Sep 20, 2019 5:09 AM by YashwantK_46

    Pin Connection for FX3 to Generate PWM

    PrN_4452166

      I have to generate the PWM Signals from FX3 about 100 Hz to 5 kHz.

      I have connected to Complex GPIF ( 18,19, 20, 21).

      This is fine or I can generate the PWM from simple GPIF?

       

        • 1. Re: Pin Connection for FX3 to Generate PWM
          YashwantK_46

          Hi,

           

          You can use the GIPO[18-21] as Complex GPIO's.

          You can't use Simple GPIO's for generating PWM.


          Please refer to section 8.9 of the FX3_TRM in the path for more information related to the GPIO's in FX3: C:\Program Files (x86)\Cypress\EZ-USB FX3 SDK\1.3\doc\firmware\FX3_TRM.pdf

           

          You can refer to 8.9.4.3 in section 8.9 for an example on configuring Complex GPIO to Generate PWM Output in FX3_TRM.pdf .

           

          Regards,

          Yashwant