13 Replies Latest reply on Oct 11, 2019 12:53 AM by MoTa_728816

    PSOC Creator build stalls when using Flip Flop component

    JeFi_4463551

      Hi,

       

      I am having trouble building any project which contains either the D Flip Flop or Analog Hardware Mux. When a project containing either of these components is built the build stalls after producing the following in the output:

       

      Any advice on how to solve or further troubleshoot this problem would be greatly appreciated.

       

      ====

       

      Elaborating Design...

      HDL Generation...

      Synthesis...

      Tech Mapping...

      Eliminating trivial wires...

      Creating carry chains...

      Creating initial macrocells...

      Creating global clocks...

      Categorizing IOs...

      Synchronizing IOs...

      ADD: pft.M0040: information: The following 3 pin(s) will be assigned a location by the fitter: Pin_1(0), Pin_2(0), Pin_3(0)

      Eliminating trivial wires...

      Mapping enabled registers into macrocells...

      Connecting carry chains to registers...

      Creating global controls...

      Removing duplicate macrocells...

      Resolving AMuxHw component...

      0% Done. Optimizing 'cydff_1'

       

      ===

       

      Environment:

      PSoC Creator  4.2 (4.2.0.641)

      Culture: English (United Kingdom)

      OS Version: Microsoft Windows NT 10.0.17763.0

      CLR Version: 4.0.30319.42000