3 Replies Latest reply on Sep 20, 2019 5:17 AM by FaLo_4458736

    Module 1DX, Yocto and imx8mm

    FaLo_4458736

      Hi,

      I try to connect and configure the 1DX SDIO module to a Imx8mm EVK board.
      The 1DX module is connected through an adapter (from Saiko system) to the microSD.

      WL_REG_ON is connected on VIO_IN (3.3V)
      WL_HOST_WAKE is not connected


      I recover the meta-murata-wireless layer from github and configure it with the script add-murata-wireless.sh
      Compilation is fine.

      I flash the eMMC with Uboot to start in TFTP + NFS.


      Firmwares are correctly located in

       

      # ls /lib/firmware/brcm/
      README_NVRAM                 brcmfmac43430-sdio.txt
      brcmfmac43012-sdio.bin       brcmfmac43455-sdio.bin
      brcmfmac43012-sdio.clm_blob  brcmfmac43455-sdio.clm_blob
      brcmfmac43012-sdio.txt       brcmfmac43455-sdio.txt
      brcmfmac43340-sdio.bin       brcmfmac4354-sdio.bin
      brcmfmac43340-sdio.txt       brcmfmac4354-sdio.clm_blob
      brcmfmac43362-sdio.bin       brcmfmac4354-sdio.txt
      brcmfmac43362-sdio.txt       brcmfmac4356-pcie.bin
      brcmfmac4339-sdio.bin        brcmfmac4356-pcie.clm_blob
      brcmfmac4339-sdio.txt        brcmfmac4356-pcie.txt
      brcmfmac43430-sdio.bin       brcmfmac4359-pcie.bin
      brcmfmac43430-sdio.clm_blob  murata-master
      


      My main issue is that I have several kinf of error messages. It seems issue on communication (RX/TX) bus.

      I search into community forum without any success.

       [   81.424980] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
       [   81.432118] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
       [   81.440554] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
       [   81.447684] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
       [   81.455792] mmc1: queuing unknown CIS tuple 0x80 (6 bytes)
       [   81.559031] mmc1: new high speed SDIO card at address 0001
       [   81.667279] brcmfmac: brcmf_sdiod_regrw_helper: failed to read data F1@0x0808c, err: -84
       [   81.694639] brcmfmac: brcmf_sdiod_regrw_helper: failed to read data F1@0x080ac, err: -84
       [   81.703149] brcmfmac: brcmf_fw_map_chip_to_name: using brcm/brcmfmac43430-sdio.bin for chip 0x00a9a6(43430) rev 0x000001
       [   81.875439] brcmfmac: brcmf_sdiod_regrw_helper: failed to read data F1@0x08508, err: -84
       [   81.895647] brcmfmac: brcmf_sdio_read_control: read 216 control bytes failed: -84
       [   81.903172] brcmfmac: brcmf_sdio_rxfail: abort command, terminate frame, send NAK
       [   84.443257] brcmfmac: brcmf_sdio_bus_rxctl: resumed on timeout
       [   84.449111] brcmfmac: brcmf_c_process_clm_blob: clmload (7222 byte file) failed (-110); 
       [   84.452354] brcmfmac: brcmf_sdio_readframes: RXHEADER FAILED: -84
       [   84.466590] brcmfmac: brcmf_sdio_rxfail: abort command, terminate frame, send NAK
       [   87.135290] brcmfmac: brcmf_sdio_bus_rxctl: resumed on timeout
       [   87.141146] brcmfmac: brcmf_c_process_clm_blob: get clmload_status failed (-110)
       [   87.148582] brcmfmac: brcmf_c_preinit_dcmds: download CLM blob file failed, -5
       [   87.155832] brcmfmac: brcmf_bus_started: failed: -5
       [   87.160747] brcmfmac: brcmf_sdio_firmware_callback: dongle is not responding


       

      [   30.304845] brcmfmac: brcmf_sdiod_regrw_helper: failed to read data F1@0x080e4, err: -84
       [   30.316715] brcmfmac: brcmf_sdiod_regrw_helper: failed to read data F1@0x080fc, err: -84
       [   30.329910] brcmfmac: brcmf_sdiod_regrw_helper: failed to read data F1@0x0c040, err: -84
       [   30.343086] brcmfmac: brcmf_fw_map_chip_to_name: using brcm/brcmfmac43430-sdio.bin for chip 0x00a9a6(43430) rev 0x000001
       [   31.405779] brcmfmac: brcmf_sdio_htclk: HT Avail timeout (1000000): clkctl 0x50
       [   32.439722] brcmfmac: brcmf_sdio_htclk: HT Avail timeout (1000000): clkctl 0x50
       [   33.458473] brcmfmac: brcmf_sdio_htclk: HT Avail timeout (1000000): clkctl 0x50


      [   43.265595] mmc1: new high speed SDIO card at address 0001
      [   43.282966] brcmfmac: brcmf_fw_map_chip_to_name: using brcm/brcmfmac43430-sdio.bin for chip 0x00a9a6(43430) rev 0x000001
      [   43.453868] brcmfmac: brcmf_sdiod_regrw_helper: failed to read data F1@0x08508, err: -84
      [   43.477337] brcmfmac: brcmf_c_preinit_dcmds: Murata Customized Version: imx-sumo-manda_r1.0;
      [   43.485820] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Sep 11 2018 09:22:09 version 7.45.98.65 (r707797 CY) FWID 01-b54727f
      [   43.499047] brcmfmac: brcmf_sdio_read_control: read 232 control bytes failed: -84
      [   43.506573] brcmfmac: brcmf_sdio_rxfail: abort command, terminate frame, send NAK
      [   46.061988] brcmfmac: brcmf_sdio_bus_rxctl: resumed on timeout
      [   46.077209] brcmfmac: brcmf_sdio_ulp_preinit: ulp_sdioctrl iovar returned err = -23
      [   46.096442] brcmfmac: brcmf_sdio_readframes: RXHEADER FAILED: -84
      [   46.102586] brcmfmac: brcmf_sdio_rxfail: abort command, terminate frame, send NAK
      [   48.738014] brcmfmac: brcmf_sdio_bus_rxctl: resumed on timeout
      [   48.747608] brcmfmac: brcmf_sdio_readframes: RXHEADER FAILED: -84
      [   48.753734] brcmfmac: brcmf_sdio_rxfail: abort command, terminate frame, send NAK
      [   51.298013] brcmfmac: brcmf_sdio_bus_rxctl: resumed on timeout
      


      [  580.074390] mmc1: new high speed SDIO card at address 0001
      [  580.167552] brcmfmac: brcmf_sdiod_regrw_helper: failed to read data F1@0x08000, err: -84
      [  580.175687] brcmfmac: brcmf_chip_recognition: chip backplane type 15 is not supported
      [  580.183543] brcmfmac: brcmf_sdio_probe_attach: brcmf_chip_attach failed!
      [  580.190299] brcmfmac: brcmf_sdio_probe: brcmf_sdio_probe_attach failed
      [  580.197025] brcmfmac: brcmf_ops_sdio_probe: F2 error, probe failed -19..
      


      Thanks for your help.

      Fabrice .