1 Reply Latest reply on Sep 10, 2019 7:34 PM by YiZ_31

    Which pins on a CCG4 can be used for CPIO?


      I'm developing for a CYPD4225-40LQXI.  The datasheet says that 30 pins are available for GPIO.  It isn't clear exactly which pins these are.  I'm currently assuming all are except for the 5 power pins, the XRES pin and the 4 CC pins.  Is this incorrect?  There are a number of pins that are not listed as GPIO, such as VBUS_P_CTRL_P, which seem to be used as GPIO in the firmware.


      Also, can all GPIO pins be used as an input to the ADC?