1 Reply Latest reply on Aug 30, 2019 4:52 AM by GauravS_31

    Procedure to use FTDI chipset for WICED debugging




      We are designing WICED application with STM32+CYW43438.

      We will make our board as CoB and there will be test point to connect JTAG and UART of STM32 for debugging.


      In order to debug with WICED studio, I think we will buy FTDI chipset board like following link and change setting by attached file.




      Then, connect JTAG pins to test point that is connected to STM32 JTAG pins.


      Is my understanding correct?


      Thank you.