- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi All,
I am trying to use a CY7C67200 USB control chip to enable communication between an FPGA and a host computer. The reason I am using this chip is that it is pre installed on the development board I am using. I have been trying to get my computer to see the chip in the device manager using a demo code provided by the FPGA manufacturer but I have had no luck. I am starting to think that I do not have the correct driver for this chip due to the fact that when I run the demo code for the computer to see the chip I get several semantic errors. Is there a driver for this chip for windows 10/how can I read the chip using windows 10.
Thank you in advance.
Solved! Go to Solution.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello,
Please install this kit https://www.cypress.com/documentation/software-and-drivers/cy3663-cd-rom-image-v10
After installing you can find the drivers in the path : C:\Cypress\USB\OTG-Host\Drivers
Best Regards,
Yatheesh
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello,
Please install this kit https://www.cypress.com/documentation/software-and-drivers/cy3663-cd-rom-image-v10
After installing you can find the drivers in the path : C:\Cypress\USB\OTG-Host\Drivers
Best Regards,
Yatheesh
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Thank you for the input. I am working on getting the CD installed on my computer. It has to go through IT so this has been taking a while. I will let y'all know what happens when I get the chance to try it.