3 Replies Latest reply on Aug 21, 2019 10:41 PM by RashiV_61

    FX3 How to do debug with CYUSB3KIT-003

    LeLi_3670906

      Hi Sir,

       

      I follow SuperSpeed Explorer Kit User Guide_001-93186_A.pdf to do debug with EZ USB suite,but return me some error as below,please help to check.

      44^error,msg="localhost:3333: \323\311\323\332\301\254\275\323\267\275\324\332\322\273\266\316\312\261\274\344\272\363\303\273\323\320\325\375\310\267\264\360\270\264\273\362\301\254\275\323\265\304\326\367\273\372\303\273\323\320\267\264\323\246\243\254\301\254\275\323\263\242\312\324\312\247\260\334\241\243\r\n."

      (gdb)

      45 monitor reset halt

      monitor reset halt

      "monitor" command not supported by this target.

      &"monitor reset halt\n"

      &"\"monitor\" command not supported by this target.\n"

      45^error,msg="\"monitor\" command not supported by this target."

      (gdb)

      46 monitor mww 0xFFFFF014 0xFFFFFFFF

      &"monitor mww 0xFFFFF014 0xFFFFFFFF\n"

      &"\"monitor\" command not supported by this target.\n"

      monitor mww 0xFFFFF014 0xFFFFFFFF

      "monitor" command not supported by this target.

      ...

      65 load

      load

      You can't do that when your target is `exec'

      &"load\n"

      &"You can't do that when your target is `exec'\n"

      65^error,msg="You can't do that when your target is `exec'"

      (gdb)

      66-exec-continue

      66^error,msg="The program is not being run."

      (gdb)

       

       

      Thanks,

      Leo