- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I am restarting or creating some new projects. I had a go at blinky - from the help doco.
I have built and modified many projects in the past with 50% success - the failures are in my understanding of the error messages like the following...
Most went well, I can create the project almost blindfolded now but I keep getting a separate TopDesign.cysch even when I think I have started completely new.
The build breaks and when searching for the error it points me to the unexpected TopDesign...
Solved! Go to Solution.
- Labels:
-
PSoC 4 Architecture
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
I think you can study with the below video : get started psoc4 turning on off led
https://www.cypress.com/video-library/PSoC-Software/get-started-psoc-4-turning-onoff-led/108361
You can learn more about the PSoC4 from the below linker: get start with psoc4
https://www.cypress.com/file/46106/download
After review previous materials, if you still has any questions, you can post your built project here.
Thanks
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
I think you can study with the below video : get started psoc4 turning on off led
https://www.cypress.com/video-library/PSoC-Software/get-started-psoc-4-turning-onoff-led/108361
You can learn more about the PSoC4 from the below linker: get start with psoc4
https://www.cypress.com/file/46106/download
After review previous materials, if you still has any questions, you can post your built project here.
Thanks