0 Replies Latest reply on Aug 19, 2019 1:17 AM by MatthewS_51

    Pollution Parameters Monitoring System Using Bluetooth Mesh

    MatthewS_51

      This project was submitted by Samyak Jain in The Cypress Bluetooth 5 IoT Design Contest with Mouser and Electromaker.io and was one of the winners! We are now posting it in the community for all of our developers to see what great things can be developed with the CYW20819 - as well as leverage some of the material to get started on your own design. All project files submitted are attached to this community post. Check it out below!

       

      Project Name: Pollution Parameters Monitoring System Using Bluetooth Mesh

       

      Project BOM:

      • EZ-BT™ Bluetooth Mesh Development Kit (CYBT-213043-MESH)
      • Arduino Uno R3 (DEV-11021)
      • LCD Display Shield (772)
      • Analog Gas Sensor MQ2 (SEN0127)
      • 40 Pin Male Headers (FIT0105)
      • Arduino 10 Jumper Wires (C000036)

       

      Project Summary:

       

      With pollution an ever rising concern in all geographies, this project implemented a prototype of how Bluetooth Mesh could be used to provide valuable insights in real time. This project leveraged the EZ-BT Bluetooth Mesh Development Kit and hooked up Gas Sensors to two different nodes, and then had one Mesh Node being a base station, connected to an LCD display. The different gas sensor values were streamed within the mesh network to the base station node, with the LCD display showcasing the current pollution metrics in real time. This project could also be expanded to multiple pollution tracking nodes.

       

      All project files are attached to this community post.