Could you please go to tools and press Find new components. Please install the new components and let me know if this solves the problem.
Can you go to your Tools>Find new components and check whether You can get option to install from Web This ADC(UAB) component.
Can you remove this space in the Path of project "sameer acoproc", then close and reopen the project in Creator 4.2 and further then check with build.
Can you share your project so that we can try to reproduce the issue.
Please ensure that there is no space in the path of Cypress Code example created in your system.
I think Ankita-san is saying that there is a space ' ' letter between "sameer" and "acoproc"
in the path name of your project in the file system.
In the title bar it reads
So how about make it to
sameer_acoproc or SammerAcproc ?
Although it's odd, with a project who's location (path name) contains space or non standard ascii letter tends to have problem with compiling.
Please share the project here, so that I can also reproduce the issue.
please create any new project with analog coprocessor with creator 4.1,
4.2. select any UAB component viz. adc. the same message will appear. also
for scanning sar_adc v 3.10 same problem.
On Tue, Aug 20, 2019 at 9:52 AM AnkitaS_51 <firstname.lastname@example.org>
Do you have any update on this. ?
I had shared UAB based ADC project for CY8C4A45AZI-483 in my last response here.
Help to resolve issue quickly.
Although this may not be the answer you wanted, I tried following.
(1) I downloaded and opened your design
(2) I updated components from menu
(3) Still I could not requicken Prog_Vref .
And when I tried to open the Web Page of the component I got 404 error.
(4) So I decided to use Vref component.
And set the type to "System wide reference"
(5) As you seemed to want to use Band Gap, I confirmed that the Design Wide Voltage Reference is BandGap (1.2V)
(6) Then I could build the project.
I wish this could be a workaround for you.
nothing happens. either chip is not supporting uab or my creator. i hold
design for clearence for production. i wish to switchover from cy8c28452 to
analog co proc. if unable then renesas is good choice for me.
On Sat, Aug 24, 2019 at 10:53 AM Motoo Tanaka <email@example.com>
Oh, I'm very sorry for hearing that.
I could not test it as I don't have the board with the device,
so all I could was confirm that the project was compile-able.
Anyway I respect your decision.