1 Reply Latest reply on Aug 7, 2019 12:37 AM by NoriakiT_91

    Psoc creator 4.2 part location

    JoLo_1693126

      Hi,

      I am new to PSOC creator. Wondering where this is part is located or how I can get it on my TopDesign. See attached.

        • 1. Re: Psoc creator 4.2 part location
          NoriakiT_91

          This is a "Digital Input Pin" component.

          The component looks like following image when put on the schematic at first.

          GS004405.png

          When you configure the component with the Component Configuration Tool, the shape will be changed.

          For example when the "interrupt" is set to "Rising Edge" and the "Dedicated interrupt" is checked,

          GS004407.png

          The Pin component would have an irq output as follows.

          GS004408.png

          Please refer the component datasheet which can be invoked by the "Open Datasheet" context menu item

          GS004410.png