5 Replies Latest reply on Jun 24, 2015 7:53 PM by userc_7511

    Module stopping after some ms

      Hello,

       

      I have a very crazy problem. Perhaps somebody had the same and could give me some hints.

      My application is running fine on the TAG-Board. Now we created our own board.

      Now my application stopps after some ms. The create()-function is done completeley. I added a counter to the finetimer. This shows the finetimer stopps after ~15 - 19 counts with a intervall of 12.5 ms.

      I also tested with proximity with the same result. Running on the TAG-Board, but only starting on our design.

       

      I check Vbat, Reset and WP-Pin, should be OK

       

      Nothing else is connected at the moment on our Board.