2 Replies Latest reply on Aug 2, 2019 3:19 AM by YaTr_3516311

    Configure mac address is unstable




      I'm testing chage mac address with Configuring the Bluetooth device address in CYW20706  link. I do the steps as below:

      1.  iBeacon-CYBT_343026_EVAL UART=COM31 downloadBT_DEVICE_ADDRESS=FFFFFFFFFFFF In the make target, then build.

      2. send a HCI reset command (01 03 0C 00)---->response:04 0E 04 01 03 0C 00

      3. send 01 10 FC 07 AA BB CC DD EE FF 00---->response:04 0E 04 01 10 FC 11

      4. reset button press


      I think there is once success with above steps. But today I tired again. Always fail. I don't know why. I use CYBT343026-01 EVAL board




        • 1. Re: Configure mac address is unstable

          Hi Treacy,


          We couldn't able to understand your query properly.

          What is your exact issue? How are you tracking BD address change? Are you seeing device address in CySmart app or any other mobile app?

          If you are trying the option Beacon-CYBT_343026_EVAL UART=COM31 downloadBT_DEVICE_ADDRESS=FFFFFFFFFFFF ,

          and then, please keep a space after download.

          ex: Beacon-CYBT_343026_EVAL UART=COM31 download BT_DEVICE_ADDRESS=FFFFFFFFFFFF

          Please try with some other valid address as well


          - Also make .rpa_refresh_timeout                = 0, in wiced_bt_cfg_settings_t of wiced_bt_cfg.c file




          • 2. Re: Configure mac address is unstable

            Sorry, I forgot a space. It is OK now.