5 Replies Latest reply on Aug 12, 2019 12:18 AM by ShifangZ_26

    code exemple CYPD3171-24LQXQ_PB  and (_CLA)build error after minor modification and


      hello community first of all thank you so much for all the support.
      so i'm having an issue with buil the code exemple CYPD3171-24LQXQ_PB and CYPD3171-24LQXQ_cla, after minor modification.
      so for the CYPD3171-24LQXQ_cla i followed this blog step as i was suggested in my previus post CCG3PA Power Adapter/Car Charger (1C+1A) single chip solution firmware customize steps

      when i buid the project i got this error in the picture below error build cla.PNG



      and for the CYPD3171-24LQXQ_PB  i should generated the config.c in EZ-pd Configuration Utility, i din't cause i don't know how to generate just the config.c

      and so when i build the project i  get this error also in the screeshot here error build pb.PNG

      i have to mention here that i have CYPD3171-24LQXQ_PB and CYPD3171-24LQXQ_cla in same workspace is this problem ? and so there is only one cc sink boot and src boot in this workspace.