5 Replies Latest reply on Jul 25, 2019 9:15 PM by MaR_3698711

    Murata Type1LD

    MaR_3698711

      We have designed a custom board using Murata type1LD and i'am using 43xxx_WIFI example to flash the board using segger J-Link EDU but i am getting the following errors.

       

      Downloading Bootloader ...

      Building apps lookup table

      "**** OpenOCD failed - ensure you have installed the driver from the drivers directory, and that the debugger is not running **** In Linux this may be due to USB access permissions. In a virtual machine it may be due to USB passthrough settings. Check in the task list that another OpenOCD process is not running. Check that you have the correct target and JTAG device plugged in. ****"

      Downloading DCT ...

      "**** OpenOCD failed - ensure you have installed the driver from the drivers directory, and that the debugger is not running **** In Linux this may be due to USB access permissions. In a virtual machine it may be due to USB passthrough settings. Check in the task list that another OpenOCD process is not running. Check that you have the correct target and JTAG device plugged in. ****"

      Downloading resources filesystem ... build/snip.scan-MurataType1LD/filesystem.bin at sector 1  size 96...

      tools/makefiles/wiced_apps.mk:334: recipe for target 'FILESYSTEM_IMAGE_DOWNLOAD' failed

      make.exe[1]: *** [FILESYSTEM_IMAGE_DOWNLOAD] Error 1

      make.exe[1]: *** Waiting for unfinished jobs....

      Makefile:351: recipe for target 'main_app' failed

      make: *** [main_app] Error 2

       

      my doubt is should we use Olimex USB JTAG Tiny (or Tiny-H) programmer or any other Programmer, in my case i am using segger J-Link EDU and i'am using WICED-studio-6.2.

      Please help me to resolve this issue