5 Replies Latest reply on Jul 25, 2019 5:57 PM by hata_3396041

    CapSense_Gap with the ground hatch

    hata_3396041

      Hello

       

      Please tell me about the design of CapSense.

       

      According to the design guide,"the gap between the sensor pad and the ground hatch should be equals to the overlay thickness".(MAX 2mm)

      https://www.cypress.com/file/46081/download (P.94)

       

      If there is no space on the board,is it not a problem to make this gap 1.5mm?

       

      Sensing method  ・・・CSD

      Sensor pad diameter・・・8㎜