2 Replies Latest reply on Jul 24, 2019 1:55 AM by ViSh_4113431

    i.MX6+1MW

    ViSh_4113431

      I need to enable interworking tag(107) in Access Point, I have setup a configuration for hostapd that provide it but it is does not show up when i am scanning the Access Point, only custom Vendor Id seems supported

        • 1. Re: i.MX6+1MW
          VinayakS_26

          Hi

           

          To enable internetworking, please  confirm whether the following line is present in  the hostapd.conf

          internetworking=1

           

           

          Please refer to the following page for hostapd conf.

          https://w1.fi/cgit/hostap/plain/hostapd/hostapd.conf

          Regards

          • 2. Re: i.MX6+1MW
            ViSh_4113431

            there is my hostapd.conf setting

             

             

             

            #2.4GHz setup wifi 80211 b,g,n

            interface=wlan0

            driver=nl80211

            ssid=hotspotname

            hw_mode=g

            channel=8

            wmm_enabled=1

            macaddr_acl=0

            auth_algs=1

            ignore_broadcast_ssid=0

            wpa=2

            wpa_passphrase=0123456789

            wpa_key_mgmt=WPA-PSK

            wpa_pairwise=CCMP TKIP

            rsn_pairwise=CCMP

             

             

            #80211n - Change TW to your WiFi country code

            country_code=TW

            ieee80211n=1

            ieee80211d=1

             

             

            # Network Authentication Type

            # This parameter indicates what type of network authentication is used in the

            # network.

            # format: <network auth type indicator (1-octet hex str)> [redirect URL]

            # Network Authentication Type Indicator values:

            # 00 = Acceptance of terms and conditions

            # 01 = On-line enrollment supported

            # 02 = http/https redirection

            # 03 = DNS redirection

            #network_auth_type=00

            #network_auth_type=02http://www.example.com/redirect/me/here/

             

             

            #IEEE 802.11u-2011

            #Enable Interworking service

            interworking=1

            access_network_type=4

            internet=1

            asra=1

            esr=1

            uesa=1

            venue_group=2

            venue_type=1

            hessid=00:00:00:00:00:01

            roaming_consortium=01010101

            venue_name=eng:rpi Test Venue

             

             

            # Additional vendor specific elements for Beacon and Probe Response frames

            # This parameter can be used to add additional vendor specific element(s) into

            # the end of the Beacon and Probe Response frames. The format for these

            # element(s) is a hexdump of the raw information elements (id+len+payload for

            # one or more elements)

            vendor_elements=dd0411223301