9 Replies Latest reply on Jul 1, 2015 4:37 PM by jota_1939431

    bonding of sensor after flashing



      I have the following problem and don't know how to solve it:

      I have to modules, a sensor and a client. Both require security and should bond.


      - both are bonded.

      - if I flash a new software on the sensor, the client can connect to the client, but on the sensor, the client is not bonded again (the client holds the bonding-information)


      On the sensor I call lesmp_sendSecurityRequest(); But it seems, they just encrypt the connection, but don't bond again. How can I achieve a new bonding?