2 Replies Latest reply on Jul 16, 2019 1:22 AM by HuYa_4265851

    How to change the physical interface form to type-c without changing USB 3.0 functions?

    HuYa_4265851

      To whom may concern,

       

      In projects using CYUSB3014, I need to implement the ability to transfer control data and upgrade FPGA programs through USB-Serial.

       

      While implementing these functions, I hope to replace the Micro USB 3.0 interface with the Type-C interface, which can realize the above functions and power the whole device.

       

      How to achieve the above functions? How to connect the signal line for changing the Micro interface to Type-C interface?

       

      Thanks & Best Regards

       

       

       

      在使用CYUSB3014的项目中,需要实现通过USB-Serial传输控制数据、升级FPGA程序的功能。

       

      在实现这些功能的同时,我希望用Type-C接口代替Micro USB 3.0接口,实现以上功能和给整个设备供电。

       

      请问该如何实现上述功能?如何连接信号线,将Micro接口转换为Type-C接口?

       

      谢谢