2 Replies Latest reply on Jul 11, 2019 10:25 AM by AnCo_2736831

    How to transmit numbers through BLE from an iOS device to the PSoC 4 BLE board?

    AnCo_2736831

      Hi,

       

      By following Lessons 1-7 of these tutorials (https://www.cypress.com/training/how-make-ios-app-control-robot-using-bluetooth-low-energy-ble), I made a PSoC 4 BLE program that turns on/off an LED light by a switch on an iOS device. (GitHub - cypresssemiconductorco/bleapp).

       

      However, instead of just using a switch to control when the LED turns on/off, I want to control the number of times the LED blinks. To do this, I plan on entering a number on the iOS device, and this number will be transmitted to the PSoC device and would dictate how many times the LED blinks.

       

      Does anyone know how to do this?

       

      Thanks,

      Andrew