1 Reply Latest reply on Jul 11, 2019 1:50 AM by SampathS_11

    Confusion about Reading/Writing to PSoC using CY3214-PSoCEvalUSB PSoC CapSensePLUS with CY3217-MiniProg1

    JoHi_4345091

      I have a CY8C24794-24LFXI chip that I plan on reading and writing a program to, and it's not clear to me on how to accomplish that based on what seen from the Cypress product line/

       

      As I understand it, the CY3217-MiniProg1 interfaces with my PC, and it is plugged into a 4 pin header on the CY3214-PSoCEvalUSB PSoC CapSensePLUS. From there I should be able to use the provided software to interface with a CY8C24794-24LFXI PSoC.

       

      What I don't understand is how I connect the PSoC to the development/prototyping board. From the screenshot here, it looks as though there is a PSoC soldered directly onto the development board. What I need to be able to do is to connect a CY8C24794-24LFXI to the MiniProg1, write or read it's data, then disconnect and solder to my PCB. How can I accomplish this? Is there a socket or breakout board I need to use? Is there a socket on the development board I don't know about? I honestly won't need a full prototyping or development kit, I really just need a way to read and write to the chip.

       

      I'd appreciate any insight into how to use these tools, thank you!