2 Replies Latest reply on Jul 3, 2019 4:33 AM by MaLu_4280191

    20719-B1_Bluetooth_Debug_Linux64 Debugger Settings

    MaLu_4280191

      What are the proper settings for the JTAG Device when debugging a CYW920719Q40EVB-01 connected via USB to an Ubuntu 16.04 LTS system running WICED Studio?

       

      I tried using the settings from Debugging_WICED.docx (Generic TCP/IP, localhost, port 3333).  I get the following errors:

       

      Error in final launch sequence

           Failed to execute MI Command:

           -target-select remote localhost:3333

       

      Error message from debugger back end:

      localhost:3333: Connection timed out.

      localhost:3333: Connection timed out.

       

      I also tried using Generic Serial with a GDB Connection String of /dev/ttyWICED_HCI_UART0

       

      Error in final launch sequence

           Failed to execute MI Command:

           -target-select remote /dev/ttyWICED_HCI_UART0

       

      Error message from debugger back end:

      Remote replied unexpectedly to 'vMustReplyEmpty':

      timeout

      Remote replied unexpectedly to 'vMustReplyEmpty':

      timeout

       

      I tried again with a connection string of /dev/ttyWICED_PUART1, and got the same errors:

       

      Error in final launch sequence

           Failed to execute MI Command:

           -target-select remote /dev/ttyWICED_PUART1

       

      Error message from debugger back end:

      Remote replied unexpectedly to 'vMustReplyEmpty':

      timeout

      Remote replied unexpectedly to 'vMustReplyEmpty':

      timeout