5 Replies Latest reply on Jul 1, 2019 6:59 AM by MichaelF_56

    CYW4343X "mfgtest" firmware

    PhKa_4324871

      Hi,

       

      I'm attempting to get a module using the CYW4343SKUBG configured for regulatory testing using the "wl" utility. I believe the CYW4343SKUBG is considered the 43430A0.

       

      When I attempt to start a continuous transmission using pkteng_start, I get the following error:

      [root@alarm user]# ./wl pkteng_start 00:11:22:33:44:55 tx 100 1024 0

      ./wl: error -23

       

      Here are the driver details:

      [root@alarm user]# ./wl ver

      1.21 RC0.0

      wl0: May 29 2017 00:03:43 version 7.13.53.9 (r664949) FWID 01-130000

       

      From what I've read, this happens because I need to load a special "mfgtest" binary into /lib/firmware/brcm. The only problem is, I can't find the binary specific to the CYW4343X. I tried the 4343WA1-mfgtest.bin from the WICED resources, but it returned the following:

      [    2.305745] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430a0-sdio for chip BCM43430/0

      [    2.315370] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43430a0-sdio.txt failed with error -2

      [    3.350122] brcmfmac: brcmf_sdio_htclk: HT Avail timeout (1000000): clkctl 0x50

      [    4.361085] brcmfmac: brcmf_sdio_htclk: HT Avail timeout (1000000): clkctl 0x50

       

       

       

      Do I have a configuration issue somewhere? Or do I need to obtain a "mfgtest" binary specific to the CYW4343SKUBG?