Attachments are accessible only for community members.
Jun 22, 2019
04:42 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Jun 22, 2019
04:42 AM
I checked HW is ok, Vcc is stable and outputs 18.8V, Vdd is 3.3V, I2C speed is lower than 100kHz, all timings are checked and OK, no line crossing. Pin 12 CS2/GUARD that also works as AXRES is +3.3V. Still after 0x2FFF trials, no ACK. Any idea?
Schematic is attached.
Solved! Go to Solution.
1 Solution
Jun 22, 2019
05:35 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Jun 22, 2019
05:35 AM
Hi: I found the problem. The I2C address is 0x37 and I assumed 0x55 although it was decimal 55 (0x37).
1 Reply
Jun 22, 2019
05:35 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Jun 22, 2019
05:35 AM
Hi: I found the problem. The I2C address is 0x37 and I assumed 0x55 although it was decimal 55 (0x37).