3 Replies Latest reply on Jun 18, 2019 8:46 PM by XiaoweiZ_71

    Problem with Magsens Tuner Or IDAC

    EsSe_4102431

      Hi all,

       

      I designed a custom board with 12 PCB- coils as for Proximity application . I am able to program my board by MinProg4 successfully but when I tried to use the Magsens tuner  the output does not change even if I approached the coils with metal target. the LX- pins are generating the driving frequency and the RX-pins are receiving the change in amplitude (I checked that using oscilloscope) but the tuner never changes it just outputs constant data. What could be the reason ? do I need to activate the IDAC?  here is the code and the warnings from the compiler.

       

      Thanks,

       

      Thanks,