8 Replies Latest reply on Jul 4, 2019 10:24 PM by ShMi_1495391

    [SPI_master]Configuration criteria of oversample -PSoC 6

    ShMi_1495391

      What is the guideline for setting oversample ?
      Should I pay attention to the actual data rate ?
      For example, under the following conditions, Actual data rate is 2000 kbps only when oversample is "5".
      ・Clk_Peri  : 50[MHz]
      ・Data rate : 2000[kbps]

       

      When [Clk_Peri / (Data rate * oversample)] is divisible, Actual data rate will be the value as configured.

      example) 50 [MHz] / (2000[kbps] * 5) = 5 with a remainder of 0.


      Is my idea correct? Also, please tell us about the basis for this.