- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello,
There is the explanation about CapSense_CalibrateAllWidgets function like below.
and CapSense_CalibrateWidget function too.
Calibrates the IDACs for all widgets in the component to the default target (85% of maximum possible raw count) value.
But if we execute CapSense_CSDCalibrateWidget funcion and set to 60% target, do both CapSense_CalibrateAllWidgets and CapSense_CalibrateWidget functions
calibrate the IDACs to 60%?
CapSense_CSDCalibrateWidget(
CapSense_BUTTON0_WDGT_ID,
CALIBRATION_TARGET_60_PERCENT
);
Best regards,
Yocchi
Solved! Go to Solution.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi
Calling the CapSense_CSDCalibrateWidget API only sets the target percent for a particular widget. It does not affect the CapSense_CalibrateAllWidgets API. CapSense_CalibrateAllWidgets will still calibrate the widgets to the default target percentage which is 85%.
Best regards
Harigovind
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi
Calling the CapSense_CSDCalibrateWidget API only sets the target percent for a particular widget. It does not affect the CapSense_CalibrateAllWidgets API. CapSense_CalibrateAllWidgets will still calibrate the widgets to the default target percentage which is 85%.
Best regards
Harigovind
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello Harigovind-san,
Thank you very much for your advice.
Best regards,
Yocchi