PSoC4100SP:SPI(Master) Slew rate

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
RyYo_1406951
Level 5
Level 5
100 replies posted 50 replies posted 25 replies posted

Please answer below.
The same question is written in English and Japanese.

図1.png

・English
Is the Slew rate of SPI (Master) MOSI, CS or CLK GPIO or SIO?

・Japanese(日本語)
SPI(Master)のSlew rateは、GPIO,SIOどちらになりますか?

Regards

0 Likes
1 Solution
Ekta_N
Moderator
Moderator
Moderator
750 replies posted First like given 250 solutions authored

Hello,

I checked in the PSoC 4100 S PLUS datasheet:

https://www.cypress.com/file/396611/download

Please have a look at the pinouts https://www.cypress.com/file/396611/downloadsection on page 10 to 13 of the datasheet.

The SPI pins are GPIO pins. Thus, the slew rate for them can be set according to the slew rate specification for GPIO pins.

Regards

Ekta

View solution in original post

2 Replies
Ekta_N
Moderator
Moderator
Moderator
750 replies posted First like given 250 solutions authored

Hello,

I checked in the PSoC 4100 S PLUS datasheet:

https://www.cypress.com/file/396611/download

Please have a look at the pinouts https://www.cypress.com/file/396611/downloadsection on page 10 to 13 of the datasheet.

The SPI pins are GPIO pins. Thus, the slew rate for them can be set according to the slew rate specification for GPIO pins.

Regards

Ekta

Thank you for your answer.

0 Likes