1 Reply Latest reply on Jun 16, 2019 5:10 PM by MoTa_728816

    working with ADC_SAR with no interrupts.

    scsc_2908381

      Hello,

       

      I would like to minimize any system interrupts and to disable the ADC_SAR_Seq_IRQ.

      But I can't seem to find any Disable Interrupts checkbox in the PSOC component.

      I am working with the component under the "Hardware trigger" mode.

       

      Thanks.

        • 1. Re: working with ADC_SAR with no interrupts.
          MoTa_728816

          Hi,

           

          I tried with my CY8CKIT-044 (CY8C4247AZI-M485).

           

          The schematic was

          000-schematic.JPG

          Then in the Workspace Explorer, ADC_SAR_Seq_1_IRQ folder was generated

          along with the ADC_SAR_Seq_1 folder.

          001-project-navigater.JPG

          When I opened the ADC_SAR_Seq_1_IRQ.h

          002-ADC_SAR_Seq_1_IRQ.JPG

          There are functions

          ==============

          /* Interrupt Controller API. */

          void ADC_SAR_Seq_1_IRQ_Start(void);

          void ADC_SAR_Seq_1_IRQ_StartEx(cyisraddress address);

          void ADC_SAR_Seq_1_IRQ_Stop(void);

          ==============

          So, I hope that you can use ADC_SAR_Seq_1_IRQ_Stop() to stop its interrupt.

          Note: The name of function changes according to the name of your ADC component.

           

          moto