CY4532 EVK, Initiating PD Data message from CCG3PA

[PrM_1403381]

Hi All,

To Send Run time request after PD contract I am using "pd_prot_send_data_msg()" CCG3PA API,

I am able to populate request structure, send using the above mentioned api.

Accept message also received from the DFP/Source, but after sending GoodCRC from CCG3PA within ~650uSec (from the EOP of GoodCRC) SoftReset is initiated.

Please find the attached CC-line sniffer captures. Let me know what is the additional configuration missing for getting the expected result in this case.

Thanks & Regards

Prasanna

[ShifangZ_26 · Accepted solution]

Hi Prasanna,

Let's tracking this question in the threads CY4532 EVK, Initiating PD Data message from CCG3PA​

Best Regards,

Lisa

[PrM_1403381]

Hi Lisa,

Thank you, Do you have any solution for the issue that I am facing. If you have can provide your inputs in the thread that you mentioned.

CY4532 EVK, Initiating PD Data message from CCG3PA

Best Regards

Prasanna