Build error has been improved.
However, the LED on the MTK host board does not light up like [MTK Host LED indications] on slide 14.
Also, the first test in MTK tool will fail.
It seems that the DUT can not be found.
It is as follows in CyBLE_MTK.h of MTK project.
#define CYBLE_TESTS_ENABLED 0
Should this be set to 1?
I changed it to 1 and tried build, but an error occurs in Build.
Thank you for your reply.
By changing the L2CAP MTU Size, I was able to test with MTK Tool.