- Is the CY8CKIT-149 "compatible in terms of programming" with the CY8C4146LQE, or there is any evaluation board more alike to our selected MCU?
CY8CKIT-149 has CY8C4147AZI-S475 which is PSoC 4 4100S Plus device,
and you are planning to use CY8C4146LQE-S423 which is PSoC 4 4100S device.
Anyway, below is my comparison of CY8C4146LQE-S423 and CY8C4147AZI-S475.
IMHO, as they seem to be reasonably close,
as far as you keep the usage of resource within the limit of CY8C4146LQE-S423,
retargeting the device of the project won't be very difficult.
My brief comparison
CY8CKIT-149 Device CY8C4147AZI-S475 CY8C4146LQE-S423 Package 64-TQFP 40-QFN Flash 128KB 64KB SRAM 16KB 8KB Freq 48MHz 48MHz Opamp(CTBm) 2 2 CSD 1 ○ Direct LCD - ○ 12bit SAR ADC 1 Msps 1000 ksps LP Comp 2 2 TCPWM 8 5 SCB 5 3 SmartIO 24 16 GPIO 54 34 Temp -40~+105 Cdegree -40~+125 Cdegree
4100S Block Diagram (from Datasheet)
4100S Plus Block Diagram (from Datasheet)
- The CY8CKIT-149 includes a programmer board with USB interface that allows programming and debugging features. Is this board able to program also the CY8C4146LQE or there is a dedicated programmer needed?
I think that the KitProg2 part of the CY8CKIT-149 should be able to be used to program and debug other PSoC 4.
Adding to what moto said, Cypress does provide prototyping kit for PSoC 4100S device . Please check " CY8CKIT-041-41XX PSoC 4100S CapSense Pioneer Kit " on Cypress website for more details. Please go to the following link:
This is specially designed for PSoC 4100S , and so you can use this kit for your purpose.