Can you run any other Snips within the SDK?
Have you verifed that the FTDI drivers are installed correctly (look in device manager and watch them enumerate when you plug the board in),
Unplug the board from your Windows machine.
Delete those stray, unknown USB drivers from Device Manager.
Open a command shell under Windows and navigate to: /Wiced-SDK/tools/drivers/BCM9WCD1EVAL1_Drivers/dpinst.exe
You should be able to reinstall the drivers.
It works now.
The problem was on the SDK. Apparently I had to delete the old and the new version and reinstall the new version.