- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi.
The 32GByte eMMC memory connected FX3S.
But on my computer, I show you four memories with have about 7.3 GByte capacity.
Can I have display one 32 Gbyte memory on my computer?
Is it possible?
What should I modify the Fx3SMassStorage source code?
Solved! Go to Solution.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello,
FX3SMassStorage example, as you have mentioned, partitions the storage device on each storage port into two volumes and enumerates them as separate logical units on the PC. You can see the corresponding code (which partitions the storage device into 2 volumes) in the CyFxMscApplnQueryDevStatus() function block of the firmware. This can be modified to change the number of partitions on the storage device.
Best regards,
Srinath S
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello,
FX3SMassStorage example, as you have mentioned, partitions the storage device on each storage port into two volumes and enumerates them as separate logical units on the PC. You can see the corresponding code (which partitions the storage device into 2 volumes) in the CyFxMscApplnQueryDevStatus() function block of the firmware. This can be modified to change the number of partitions on the storage device.
Best regards,
Srinath S