1 Reply Latest reply on May 19, 2019 10:28 PM by PriyaM_16

    How to set monitor mode, continuous tx at different bitrate by wl on CYW43455?


      Hi Cypress:


      My product is using cyw43455 which is under CE certification process currently,

      So my question is similar on following two threads, but they are all locked, so I raised another thread

      Manufacturing test firmware for 43455

      BCM43438 MFG firmware


      I am using wl on linux, on the raspberry pi 3 B+ model(cyw43455) with mfg.bin.

      I'd like to ask What are the wl commands to  set cyw43455 to transmit at a specified channel, a specified bitrate?


      And how to set cyw43455 in receiver mode? Thanks a lot