3 Replies Latest reply on May 8, 2019 10:30 PM by MuthuM_11

    HX3C USB

    srm_4071611

      Hello Team,

       

      We are trying to configure HX3C USB Hub. Earlier device is detecting but it is showing as Unknown device. But at present it is not detecting at all. Attached schematics, hardware setup for your reference.

      In schematics we used pogo pins (J92, J109, J110, J111, J112, J113, J114) to interconnect the mother card and daughter card of USB Type C receptacle.

       

      With 3.0 USB Type c there is no positive result. Trying from past few months. Still can't able to achieve. Kindly suggest possible solution to overcome this problem.

       

      If we go with 2.0 USB micro B. Can we achieve our configuration. If yes, kindly suggest how to configure HX3C using usb 2.0.

       

      Regards

      Srinivas