3 Replies Latest reply on May 19, 2019 10:33 PM by RuzheZ_36

    Connect all voltage ports and gnd ports in new design


      I am designing new board with psoc 5lp device. I only have one supply voltage of 3.3V in  a separate plane and also one gnd plane.

      the design is only digital with uart ,i2c and 1-wire communications.

      Can I connect all the voltage ports like VCCA, VDDA, VCCD,VDDD, VDDIOs directly to the 3.3V plane (with the required capacitors to GND plane)

      and all the gnd ports like VSSA,VSSB,VSSD  directly to the GND plane?