1 Reply Latest reply on May 10, 2019 1:43 AM by PriyaM_16

    Firmware download issue on Sterling-LWB for WICED development board

    dutr_4207231

      i am following the Sterling-LWB STM expansion board user guide to build and download the demo software: "snip.scan-LSRSTERLING_00950-ThreadX-NetX-SDIO download download_apps run"

       

      it failed:

       

      Downloading Bootloader ...

      Building apps lookup table

      "**** OpenOCD failed - ensure you have installed the driver from the drivers directory, and that the debugger is not running **** In Linux this may be due to USB access permissions. In a virtual machine it may be due to USB passthrough settings. Check in the task list that another OpenOCD process is not running. Check that you have the correct target and JTAG device plugged in. ****"

      Downloading DCT ...

      "**** OpenOCD failed - ensure you have installed the driver from the drivers directory, and that the debugger is not running **** In Linux this may be due to USB access permissions. In a virtual machine it may be due to USB passthrough settings. Check in the task list that another OpenOCD process is not running. Check that you have the correct target and JTAG device plugged in. ****"

      Downloading Application ...

      Downloading WIFI_FIRMWARE ... at sector 1  size 94...

      The process cannot access the file because it is being used by another process.

      make.exe[1]: *** [WIFI_FIRMWARE_DOWNLOAD] Error 1

      tools/makefiles/wiced_apps.mk:350: recipe for target 'WIFI_FIRMWARE_DOWNLOAD' failed

      make.exe[1]: *** Waiting for unfinished jobs....

      "**** OpenOCD failed - ensure you have installed the driver from the drivers directory, and that the debugger is not running **** In Linux this may be due to USB access permissions. In a virtual machine it may be due to USB passthrough settings. Check in the task list that another OpenOCD process is not running. Check that you have the correct target and JTAG device plugged in. ****"

      make: *** [main_app] Error 2

      Makefile:351: recipe for target 'main_app' failed

       

       

      14:35:05 Build Finished (took 1m:13s.612ms)

       

      The SDK is 6.21 and when I checked the port of the Sterling-LWB STM expansion board, it appeared as below:

       

      Also, I could not find the "43xxx_Wi-Fi/tools/drivers/BCM9WCD1EVAL1/BCM9WCD1EVAL1_A.inf" as showed in the 3.5.1 section (page 14 of 25) of the user manual.

       

      Any ideas can you give on what is done wrong or how to fix it?

       

      Many thanks

       

      Duy