1 Reply Latest reply on Apr 18, 2019 1:48 AM by SudheeshK_26

    S25FL256S VIO 1.8V operation

    ramuc_4184856

      Hi,

      I plan to use S25FL256S (S25FL256SAGMFIR01) in my design for 1.8V VIO operation. Attached is the schematics.

       

      I have 3 supplies

      1. B_1V8_SF - 1.8V for serial flash (generated for sequencing)
      2. B_3V3_D - 3.3V System Supply
      3. B_1V8_D - 1.8 V System Supply

      In system board power sequencing is such a way that B_1V8_D --> B_3V3_D --> B_1V8_SF.

       

      in order to meet the sequencing need for i generate B_1V8_SF from B_3V3_D.

       

      pls review my schematics

       

      My concerns are

      1. Which pull up (HOLD & WP) rail I should use B_1V8_D or B_1V8_SF?? my concern is since B_1V8_D come first will it raise the voltage level of VIO rail via input pins??

       

      2. IF I need to cull up CS as suggested in data sheet which rail should I use.

       

      Please suggest